KINGSTON n ValueRAM - DDR4 - module - 4 GB - DIMM 288-pin - 3200 MT/s / PC4-25600 - CL22 - 1.2 V - unbuffered - non-ECC
Frontpage
Memory
System Memory
KINGSTON n ValueRAM - DDR4 - module - 4 GB - DIMM 288-pin - 3200 MT/s / PC4-25600 - CL22 - 1.2 V - unbuffered - non-ECC
|
|
KINGSTON n ValueRAM - DDR4 - module - 4 GB - DIMM 288-pin - 3200 MT/s / PC4-25600 - CL22 - 1.2 V - unbuffered - non-ECC
-
ECC
No
-
Registered
No
-
Form Factor
DIMM
-
Memory Size
4GB
-
Type
DDR4
-
Kit
No
-
Speed MHz
3.2GHz
|
Description
Specifications
ValueRAM's KVR32N22S6/4 is a 512M x 64-bit (4GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
| Buffered memory type | Unregistered (unbuffered) |
| Internal memory | 4 GB |
| Memory layout (modules x size) | 1 x 4 GB |
| Internal memory type | DDR4 |
| Memory data transfer rate | 3200 MT/s |
| Component for | PC/Server |
| Memory form factor | 288-pin DIMM |
| ECC | No |
| CAS latency | 22 |
| Memory ranking | 1 |
| Memory voltage | 1.2 V |
| Module configuration | 512M x 64 |
| Row cycle time | 45.75 ns |
| Refresh row cycle time | 350 ns |
| Row active time | 32 ns |
| Programming power voltage (VPP) | 2.5 V |
| Country of origin | Taiwan |
| Lead plating | Gold |
| JEDEC standard | Yes |
| Operating temperature (T-T) | 0 - 85 °C |
| Storage temperature (T-T) | -55 - 100 °C |
| Compliance certificates | RoHS |
| Doesn't contain | Halogen |
| Width | 133.3 mm |
| Height | 31.2 mm |
| Harmonized System (HS) code | 84733020 |
Please note that although care has been taken in the degree of relevancy, pictures are for
display purposes only, and product appearance may differ from what you see. If there are any
discrepancies between the product headline, description and picture, the correct information
will be in the product headline (i.e. computer systems may not come with monitors even if
pictured that way). If anything is unclear, please email support before placing your order.