Standards |
IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460) |
Cabling type |
Category 5e or better |
Antennas |
Internal antennas optimized for desktop installation with vertical orientation |
LED indicators |
Power, WLAN, LAN |
Operating system |
Linux |
Physical Interfaces |
Ports |
10/100/1000 Ethernet, with support for 802.3af/at PoE, Power Port for AC adapter |
Power Supply |
External 12V 1.5A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af/at PoE |
Buttons |
Reset button, Power (on/off), Push button |
Lock slot |
Slot for Kensington lock |
LEDs |
Power, Wireless, Ethernet |
Physical Specifications |
Physical dimensions (W x D x H) |
6.693 x 6.693x 1.413 in. (170 x 170 x 35.9 mm) |
Weight |
0.89 lb (0.40kg) |
Network Capabilities |
VLAN support |
Yes |
Number of VLANs |
1 management VLAN plus 8 VLANs for SSIDs |
802.1X supplicant |
Yes |
SSID-to-VLAN mapping |
Yes |
Auto channel selection |
Yes |
Spanning tree |
Yes |
Load balancing |
Yes |
IPv6 |
Yes
● IPv6 host support
● IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc. |
Layer 2 |
802.1Q-based VLANS, 8 active VLANS plus 1 management VLAN |
Security |
WPA and WPA2 |
Yes, including Enterprise authentication |
Access control |
Yes, management access control list (ACL) plus MAC ACL |
Secure management |
HTTPS |
SSID broadcast |
Yes |
Rogue-access-point detection |
No |
Mounting and Physical Security |
Mounting options |
Desktop only |
Physical security lock |
Kensington lock slot |
Quality of Service |
Quality of service (QoS) |
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS |
Performance |
Wireless throughput |
Up to 300-Mbps data rate (real-world throughput will vary) |
Recommended user support |
Up to 32 connective users, 16 active users per radio |
Configuration |
Web user interface |
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) |
Management |
Management protocols |
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour |
Remote management |
Yes |
Event logging |
Local, remote syslog, email alerts |
Network diagnostics |
Logging and packet capture |
Web firmware upgrade |
Firmware upgradable through web browser, imported/exported configuration file |
Dynamic Host Configuration Protocol (DHCP) |
DHCP client |
IPv6 host |
Yes |
HTTP redirect |
No |
Wireless |
Frequency |
Dual concurrent radios (2.4 and 5 GHz) |
Radio and modulation type |
Dual radio, orthogonal frequency division multiplexing (OFDM) |
WLAN |
802.11n
2x2 multiple-input multiple-output (MIMO) with 2 spatial streams
20, and 40 MHz for 802.11n
PHY data rate up to 600 Mbps |
Data rates supported |
802.11a/b/g:
● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
● 802.11n: 6.5 to 300 Mbps
◦ 20-MHz bandwidth: MCS 0-15 for supported data rates
◦ 40-MHz bandwidth: MCS 0-15 for supported data rates |
Frequency Band and 20-MHz Operating Channels |
A Regulatory Domain:
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.240 GHz; 4 channels
● 5.745 to 5.825 GHz; 5 channels |
E Regulatory Domain:
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.240 GHz; 4 channels
C Regulatory Domain:
● 2.412 to 2.462 GHz; 11 channels
● 5.745 to 5.805 GHz; 4 channels |
Maximum Number of Nonoverlapping Channels |
2.4 GHz
● 802.11b/g
◦ 20 MHz: 3
● 802.11n
◦ 20 MHz: 3 |
5 GHz
● 802.11a
◦ 20 MHz: 9
● 802.11n
◦ 20 MHz: 9
◦ 40 MHz: 4 |
Wireless isolation |
Wireless isolation between clients |
External antennas |
None |
Internal antennas |
Internal Fixed PiFA Antenna |
Antenna gain in dBi |
Maximum antenna gain of 3.4 dBi on 2.4 GHz
Maximum antenna gain of 4.5 dBi on 5 GHz |
Wireless distribution system (WDS) |
Yes |
802.11i |
Yes |
Multiple SSIDs |
8 |
Wireless VLAN map |
Yes |
WLAN security |
Yes |
Wi-Fi Multimedia (WMM) |
Yes, with unscheduled automatic power save |
Operating Modes |
Access point
|
Access Point mode, WDS Bridging, Workgroup Bridge mode |
Environmental |
Power options |
IEEE 802.3af/at Ethernet switch
Cisco Power Injector - SB-PWR-INJ2-xx
AC Adapter - included 12v1.5A
PoE Peak power: 7.42W |
Compliance |
Safety:
● UL 60950-1
● CAN/CSA-C22.2 No. 60950-1
● IEC 60950-1
● EN 60950-1
Radio approvals:
● FCC Part 15.247, 15.407
● RSS-210 (Canada)
● EN 300.328, EN 301.893 (Europe)
● AS/NZS 4268.2003 (Australia and New Zealand)
EMI and susceptibility (Class B):
● FCC Part 15.107 and 15.109
● ICES-003 (Canada)
● EN 301.489-1 and -17 (Europe) |
Operating temperature |
0° to 40°C (32° to 104°F) |
Storage temperature |
-20° to 70°C (-4° to 158°F) |
Operating humidity |
10% to 85% noncondensing |
Storage humidity |
5% to 90% noncondensing |
System memory |
128-MB RAM
128-MB Flash |
Package Contents |
● Cisco WAP131 Wireless-N Dual Radio Access Point
● AC Power Adapter
● User guide on CD-ROM
● Quick-start guide
● Ethernet network cable
|
Minimum Requirements |
● Switch or router with PoE support, PoE injector, or AC Power Adapter
● Web-based configuration: Java-enabled web browser |
Warranty |
Access point |
Limited lifetime |